Automotive Science and Engineering
Iran University of Science & Technology
Sun, Aug 11, 2024
[Archive]
Volume 2, Issue 3 (7-2012)
ASE 2012, 2(3): 180-192 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mirzaamiri, Esfahanian, Ziaei-Rad. Crash Test Simulation and Structure Improvement of IKCO 2624 Truck According to ECE-R29 Regulation . ASE 2012; 2 (3) :180-192
URL: http://www.iust.ac.ir/ijae/article-1-145-en.html
URL: http://www.iust.ac.ir/ijae/article-1-145-en.html
Abstract: (24467 Views)
During the design and development of truck cabins, the safety of the driver and the front seat passenger in
an accident is an important task and should be considered. The cab must be designed in such a way that in
an accident a sufficient survival space is guaranteed. The aim of this study is to investigate the behavior of
Iran Khodro (IKCO) 2624 truck subjected to a complex crash test according to regulation ECE-R29. This
regulation is a comprehensive European regulation consisting of three tests: 1-Front impact test (Test A), 2-
Roof strength test (Test B), 3-Rear wall strength test (Test C). These tests do not consider the safety of the
occupant directly however, a III-50th% dummy was used to assess the cab’s deformations relative to the
driver survival space. A 3D finite element model of the cab and chassis was developed and subjected to
tests by using LS-DYNA software. The results indicate that the cab complied with Test A and C
successfully while it passed Test B marginally. Finally, two solutions are suggested and implemented to
improve the cab’s response for Test B.
Type of Study: Research |
Subject:
Internal Combustion Engines (ICE, ...)
Send email to the article author
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
