Mir Habibi A.r., Mir Habibi A.r., Mir Habibi A.r.,
Volume 1, Issue 1 (3-2004)
Abstract
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the thickness of nickel coating on surface condition and also the tensile strength of the carbon fibers has been investigated. The study of surface condition of the coated carbon fibers by SEM showed that the nickel coating at the thickness of about 0.5 pin has the best continuity oil the carbon fibers. The results of tensile tests of carbon fibers coated with different thickness of nickel showed that increasing the thickness of coating layer decreases the overall strength of fibers.
E. Maleki, K. Reza Kashyzadeh,
Volume 14, Issue 4 (12-2017)
Abstract
Hardened nickel coating is widely used in many industrial applications and manufacturing processes because of its benefits in improving the corrosion fatigue life. It is clear that increasing the coating thickness provides good protection against corrosion. However, it reduces the fatigue life. Thus, applying a thin layer of coated nickel might give an acceptable corrosion protection with minimum loss of the fatigue life. In the present study, the effects of hardened nickel coating with different thicknesses on the fatigue behavior of CK45 mild steel were experimentally investigated. After conducting the experimental tests, we carried out two different modeling approaches of finite element method (FEM) and artificial neural network (ANN). In the FEM modeling, an attempt was made to analyze the fatigue of the components by modeling the interface phase between the base metal and coating more accurately and using the spring elements; ANNs were developed based on the back propagation (BP) error algorithm. The comparison of the obtained results from FEM and ANN modeling with the experimental values indicates that both of the modeling approaches were tuned finely.
