Volume 16, Issue 2 (June 2019)                   IJMSE 2019, 16(2): 21-32 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Adineh M, Doostmohammadi H, Raiszadeh R. Effect OF SI and AL on the Microstructure, Mechanical Properties and Machinability of 65CU-35ZN Brass. IJMSE 2019; 16 (2) :21-32
URL: http://ijmse.iust.ac.ir/article-1-1126-en.html
Effect OF SI and AL on the Microstructure, Mechanical Properties and Machinability of 65CU-35ZN Brass
M. Adineh , H. Doostmohammadi , R. Raiszadeh
Abstract:   (14835 Views)
Relations between the microstructure, mechanical properties and machinability of as-cast 65Cu-35Zn brass with various amounts of Al from 0 to 4.72 and Si from 0 to 3.62 wt% were investigated. Both Si and Al initially enhanced the UTS and toughness of the brass samples, which led to improvement in machinability due to a reduction in the main cutting force. A duplex brass with random oriented α plates in β’ matrix was found to have the best machinability among the other microstructures. It was found that beside the presence of brittle phases, such as β’ phase in the microstructure, the morphology and hardness of the phases involved had significant influence on machinability.
Keywords: Brass, Silicon, Aluminum, microstructure, machinability
Full-Text [PDF 1220 kb]   (4233 Downloads)    
Type of Study: Research Paper | Subject: Ceramics
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb