Search published articles


Showing 4 results for Radiation

Z. Baniamerian,
Volume 5, Issue 1 (3-2015)
Abstract

Continuous radiation ovens are of widely used apparatuses in paint cure and coating industries. The most important issue that guarantee the quality of paint curing is suitable thermal condition. Designing of these ovens for curing paint on bodies of complex geometries has become a challenge for many years. In the present study a new designing approach is introduced and advised because of its acceptable capabilities as well as its high speed. This approach is based on cure window criterion and applies gradient optimization technique. The present work can be divided into two parts: first, geometric and thermal simulation of the curing body and second, preparing the design tool.Since a significant part of designing procedure usually devotes the iterations of optimization procedure, defining a proper objective function efficiently reduces the time consumed for designing procedure. Procedure of finding an appropriate objective function has been comprehensively discussed in the present article. In this regard a new approach, called Hybrid method, applying an objective function based on few number of elements on the curing body is introduced. That is more fast and capable relative to other methods addressed in this study. Capability of the proposed methods is then evaluated for a typical complicated geometry.
R. Mehdipour, Z. Baniamerian, S. Sattar,
Volume 5, Issue 3 (9-2015)
Abstract

Paint cure oven is one of the most important parts of automobile production line. The cure speed and the magnitude of energy consumption are significant in auto manufacturing industry. The radiation oven has been of the interest by cure industry due to the reduction in energy consumption and appropriate cure. The design process of these ovens is really complex specially for bodies with complex geometry and bodies which especially delicate to specific temperature condition. According to the progress of computation equipment abilities and design algorithms, the utilization of these ovens has gained considerable attention from auto manufacturing industry in recent years. This study considers the benefits and defects of the radiation oven and shows that replacement of the convection ovens with radiation ovens in Iran Auto manufacturing industry would lead to 32% energy saving. The design process of convection continuous ovens is easier than radiation ovens but the associated numerical modeling is complicated and computationally intensive. In this study, the moving boundary method and its application to convection continuous ovens are discussed. The numerical results based on the moving boundary method are compared with the experimental results.


Z. Baniamerian,
Volume 6, Issue 1 (3-2016)
Abstract

<span style="line-height: 115%; font-size: 10pt; font-style: normal; mso-bidi-font-size: 12.0pt; mso-ascii-font-family: " times="" new="" roman";="" mso-hansi-font-family:="" "times="" mso-bidi-language:="" fa;"="">This paper concentrates on a new procedure which experimentally recognises gears and bearings faults of a typical gearbox system using a least square support vector machine (LSSVM). Two wavelet selection criteria Maximum Energy to Shannon Entropy ratio and Maximum Relative Wavelet Energy are used and compared to select an appropriate wavelet for feature extraction. The fault diagnosis method consists of three steps, firstly the six different base wavelets are considered. Out of these six wavelets, the base wavelet is selected based on wavelet selection criterion to extract statistical features from wavelet coefficients of raw vibration signals. Based on wavelet selection criterion, Daubechies wavelet and Meyer are selected as the best base wavelet among the other wavelets considered from the Maximum Relative Energy and Maximum Energy to Shannon Entropy criteria respectively. Finally, the gearbox faults are classified using these statistical features as input to LSSVM technique. The optimal decomposition level of wavelet is selected based on the Maximum Energy to Shannon Entropy ratio criteria. In addition to this, Energy and Shannon Entropy of the wavelet coefficients are used as two new features along with other statistical parameters as input of the classifier. Some kernel functions and multi kernel function as a new method are used with three strategies for multi classification of gearboxes. The results of fault classification demonstrate that the LSSVM identified the fault categories of gearbox more accurately with multi kernel and OAOT strategy.


Mr Meghdad Pishgooie, Seyed Masoud Hosseini Sarvari, Seyed Hossein Mansouri,
Volume 9, Issue 1 (3-2019)
Abstract

The purpose of this study is to investigate the effect of radiation heat transfer on temperature distribution and heat flux to the walls of a diesel engine. A diffusion flame is modeled in a simple cylindrical geometry and boundary conditions are defined. A specific solver which can model the turbulent diffusion flame by considering radiation in participating media is used to solve the problem. The solver is verified using experimental data of a furnace. The results show that with considering radiation and non-gray effects in the model, the flame temperature is calculated higher than that with ignoring these effects (about 11% in problem considered in this study).
 

Page 1 from 1     

© 2022 All Rights Reserved | Automotive Science and Engineering

Designed & Developed by : Yektaweb