M.h. Shojaeefard, G.r. Molaeimanesh, N. Aghamirzaei, S. Ghezelbiglo, B. Zeinolabedini,
Volume 5, Issue 4 (12-2015)
Abstract
Due to the increasing development in various branches of the automotive industry, the need for a comfort climate in the cabin is more sensible. However, to achieve climate comfort, HVAC system consumes a considerable amount of engine power. Hence, improving HVAC system performance leads to more energy saving of the vehicle which is a critical factor for nowadays automotive. Besides, one crucial task of HVAC system is defrosting/defogging of windshield which is considered as a mandatory requirement in most countries. In the current study, the defrosting/defogging performance of HVAC system in the main product of national vehicle platform is numerically evaluated based on the ECE-78-715 legal requirement. For this purpose, after validation and mesh independency study, the transient air flow in three-dimensional cabin geometry is simulated by SSTk-ω turbulence model via ANSYS Fluent software and the windshield thermal condition is reported during defrosting/defogging. Besides, two national HVAC standards of AERC-10-01 and AERC-10-02 are also checked. The results demonstrate that HVAC system of the main product of the national vehicle platform can satisfactorily fulfill ECE-78-715, AERC-10-01 and AERC-10-02.
Sasan Zanganeh, Dr Mohammad Hassan Shojaeefard, Dr Gholam Reza Molaeimanesh, Dr Masoud Dahmardeh, Mahdi Mohammadi Aghdash,
Volume 12, Issue 4 (12-2022)
Abstract
As alternatives for future refrigeration, heat pumping, air conditioning, or even power generation plants are emerging due to the regulatory changes, R744 (carbon dioxide) is considered as a serious alternative to be the successor of other Halogenated Hydrocarbons Refrigerants (HHR) for the AC-system of vehicles. This paper investigates the heat transfer performance of R744 through a subcritical vehicular condenser, designed and manufactured for the first product based on NP01 platform (Iranian vehicle), at different operating conditions in terms of refrigerant mass flow rate and wind velocity. The experiments carried out in order to investigate the effect of mass flow rate, the R744 inlet temperature was observed to have sudden fluctuations. At the condenser outlet, for the smallest mass flow rate, the least variation of temperature was observed. It was also found out that for higher air velocities through the condenser, the stabilized temperature after the condenser was lower. The results show that the performance of the designed and manufactured automotive condenser based on R744 refrigerant is acceptable which makes it a suitable candidate for automotive applications.
As alternatives for future refrigeration, heat pumping, air conditioning, or even power generation plants are emerging due to the regulatory changes, R744 (carbon dioxide) is considered as a serious alternative to be the successor of other Halogenated Hydrocarbons Refrigerants (HHR) for the AC-system of vehicles. This paper investigates the heat transfer performance of R744 through a subcritical vehicular condenser, designed and manufactured for the first product based on NP01 platform (Iranian vehicle), at different operating conditions in terms of refrigerant mass flow rate and wind velocity. The experiments carried out in order to investigate the effect of mass flow rate, the R744 inlet temperature was observed to have sudden fluctuations. At the condenser outlet, for the smallest mass flow rate, the least variation of temperature was observed. It was also found out that for higher air velocities through the condenser, the stabilized temperature after the condenser was lower. The results show that the performance of the designed and manufactured automotive condenser based on R744 refrigerant is acceptable which makes it a suitable candidate for automotive applications.
